Center and ring feeding capacity(t/h):200-260
Raw material falls down into feed hopper,then the material enters impeller through central entrance hole. It is accelerated in high-speed impeller, then it is thrown out at the speed of 60-75m/s. When hitting impact plate, it is crushed. Final products come downwards though outlet.
Raw material falls down into feed hopper, then through ring, it is divided into two parts by material-dividing plate. One enters into impeller through the center of material-dividing plate. The other falls down from outside of material-dividing plate. Material, which is thrown out by impeller at the speed of 60-75m/s, is hit coming down from outside of material-dividing plate. In this way, material is crushed.
|Center and Ring feeding||120-180||200-260||300-380||450-520|
Max Feed Size (mm)
|Rotation speed (r/min)
|Power for double motor (kW)
|Overall Dimension L×W×H (mm)
|Power Source||380v 50Hz|
|Vibrating Sensor||Inspect scope: 0.1-20mm/s adjusted continuously|
Lubrication hydraulic pressure station
|Power for double oil pump
|To make sure the supply of the oil with double oil pump; stop working without oil or hydraulic pressure; temperature falls when the water cools; start the motor by heating it in winter.|
|Power for oil box heater